HOW TO MAKE ELECTRICITY BEL
Tools Required:
scissors
screwdriver
Special Cables Tape
Materials Required
2 m long cable
5 watt lamp colorful
Lamp housing 1 piece
Switches 1 pc
The head end of the cable to connect to the outlet 1 pc
Electric bell 1 piece
2 m long cable
5 watt lamp colorful
Lamp housing 1 piece
Switches 1 pc
The head end of the cable to connect to the outlet 1 pc
Electric bell 1 piece
How To Make
- First, cut the cable as long as 10 cm 2 pieces, so the rest of the 2m cable into 180 cm.
- Second, take one piece of cable as long as 10 cm, and connect with an electric bell wiring by color.
- Third, reconnect the cable ends are not attached to the lamp housing.
- Fourth, take the cable as long as 10 cm a second, then merge into two pairs in the lamp housing, according to color. like this
- Fifth, The fifth stage is a fairly complicated, first connect the cable end is connected to the lamp housing, then paralleled with the remaining cables were 180 cm long with a switch, as shown below.
- sixth, connect the last cable end with the head end of the cable.
- seventh, the bell is ready for use.